Semi-auto Bubble Removing Machine for Cellhone LCD Repair Refurbish
This equipment is to do bubble removing process, which is the last steps for repairing ( refurbishing ) broken LCD screen of smartphones or tablets after laminating. Then you will get a perfect refurbished new part for your phone. You need this machine to increase working efficiency when quite a few screens to be removed bubble.
Working voltage: 110V-220V
Working power: 1200W
Working pressure: 0.1-0.8Mpa (if the pressure is over 0.8Mpa, the machine will release pressure automatically)
Working temperature: 30°C - 120°C (if the temperature is over 120°C, the power will be cut off automatically)
Dimension: 41 x 41 x 42cm
Internal diameter: 35 x 26cm
Using pressure and temperature to remove air bubbles generated during LCD laminating process.
Temperature (50°C), time (15 minutes) and pressure (0.6Mpa) have been preset, easy to operate.
Small volume, covers less area, good deaeration effect.
Supports automatic and manual control.
The equipment heating up fast, precise temperature can be set to automatically control cylinder temperatures over 120°C, automatic over-temperature shutdown protection, safer!
This equipment strong high pressure bubble, safe, durable, does not damage the LCD screen, does not rebound.
Manual opening and pressure adjustable, automatic, manual pressurization and pressure relief, pressure over 8 kg auto exhaust, overpressure protection is more safety first!
Special steel lock nut production, durable! And can be replaced individually, without affecting the cylinder! Cylinder with stainless steel pallets, cylinders never rust!
It is a high-quality, safe, durable new bubble machine. Custom specifications.
1 x Semi-auto bubble removing machine
1 x Power Plug
Certificate: CE Certificate
Warranty: 1 Year Warranty
Shipping Packing: Wodden Box Packing
Method of use:
Unscrew the screws, open the bubble removing machine.
Put the laminated LCD into it and tighten the screws, ensure safety.
Press Power button to turn on power.
Press Heating button, the machine will operate automatically.
After completion, press Power button again to turn off power.
Unscrew the screws, take out the LCD.
This machine needs the help of air compressor (not included) to work effectively.
This machine will only work effectively when you use the professional tool to bond the digitizer and LCD. If you bond the digitizer and LCD by hand, we can not guarantee the quality of bubble removing.
When used, must be confirmed no pressure before opening the lid!
Pay attention that when using the temperature setting is too high!
Parts offer a 90-Day warranty. The warranty period covers any defects in the material or the workmanship of the product. Warranty does not cover any damage done while using the product. Any product returned within warranty period will be eligible for a refund or a replacement.