Power Testing Cable with Original Battery Chip for All iPhone Series

Power Testing Cable with Original Battery Chip for All iPhone Series

• input range: 3.7v-5.0v
• OVP will be enabled once input is greater than 5.0V
• UVLO will be enable once input is less than 3.0V
• Green indicator is on when output is switched on, red indicator is on in OVP mode.
• Over voltage will increase the risk of damaging the logic board while testing. Can use the crocodile clip to do short test if needed. Continuous output on the crocodile clip is not limited by the OVP/UVLO.

Note: it can not open the phone on one power, need the tweezers to click the power cable dot.

Product Features:

1. Upgrade to 8/8P X
2. Built-in original IC data : Solve the problem of standby restart of Apple's series mobile phone power cords, solve the problem of high temperature when powering on mobile phone; support 6-8/8P/X power display.
3. Add trigger proble: The trigger probe can be used instead of tweezer to start the system. It is convenient and quick to power on mobile phone which can totally replace traditional method of tweezer.
4. USB expansion interface: USB expansion interface, to facilitate the follow-up upgrade, the mainline could handle 10A current. Red and black power clip can pass 3A current to solve the problem caused by too large current so that it would automatic power off, and it would also protect phone when taking photos used ordinary power line.

Support Model:

• iPhone 4
• iPhone 4S
• iPhone 5
• iPhone 5 SE
• iPhone 5S
• iPhone 5C
• iPhone 6
• iPhone 6 Plus
• iPhone 6S
• iPhone 6S Plus
• iPhone 7
• iPhone 7 Plus
• iPhone 8
• iPhone 8 Plus
• iPhone X