Sony Xperia miro Touch Screen with Digitizer
- Usually ships in 24 hours
Sony Xperia miro ST23I Touch Screen with Digitizer
Cracked,Shattered or Borken Sony Xperia miro ST23I Glass,Unresponsive to touch?
This is the replacement front glass panel and Digitizer for the Sony Xperia miro ST23I (LCD NOT Includede).This part is responsible for all touch functionality of the Sony Xperia miro ST23I.If you recently dropped your Sony Xperia miro ST23I,this is the glass/digitizer combo you need to replace it with.Beware of glass without the digitizer attached as the two must be replaced simultaneously.
Often Corrects the Following Problems:
- Cracked,Scratched,Broken or shattered Glass
- Unresponsive to touch
Sony Xperia miro ST23I
How to tell which Screen part you need for the Sony Xperia miro ST23I:
- LCD Only:If the image under the glass is broken and the touch pancel is NOT then you only need an LCD
- Touch Panel aka Digitizer:If the top touch panel or aka glass top is cracked or broken but the image under it is fine,then you only need the Touch Panel
- Complete Screen with Touch Panel and LCD:If the top touch panel is broken and the lcd image is either black liquid or cracked you need a complete screen
Product well packed. Good delivery information.
The screen arrived very quickly considering which was impressive considering the distance it had to travel. It was well packed. I found intructions online detailing how to fit the screen. I needed to purchase some special screwdrivers separately which cost £4 on eBay. Also when removing the broken screen I had to apply some new adhesive to the back of the phone and I used thin strips of double sided tape from the hardware store. The phone is now working perfectly with the new screen. I would highly recommend Parts4Repair and will use them again in the future.