Touch Screen Digitizer for Huawei Y3II (Version 1) -Black
Need a good quality touch screen digitizer for Huawei Y3II (Version 1)
This is the replacement front glass panel and Digitizer for the Huawei Y3II (Version 1) (LCD NOT Includede). This part is responsible for all touch functionality of the Huawei Y3II (Version 1). If you recently dropped your Huawei Y3II (Version 1), this is the glass/digitizer combo you need to replace it with. Beware of glass without the digitizer attached as the two must be replaced simultaneously.
- It is not easy to repair touch panel, It is a professional job, and special repairing tools are required for assembling or disassembling the screen. So we suggest that replacing the item should be done by a experienced person. If not, we suggest you order complete screen assembly.
- There are 2 versions for Huawei Y3II, one is for 3G version, the other is for 4G verison, you would find the differences on the flex cable. and this item is straight flex cable, please look at the picture carefully before you order.
Often Corrects the Following Problems:
- Cracked,Scratched,Broken or shattered Glass
- Unresponsive to touch
Huawei Y3II (Version 1)
How to tell which Screen part you need for Huawei Y3II (Version 1):
- LCD Only:If the image under the glass is broken and the touch pancel is NOT then you only need an LCD.
- Touch Panel aka Digitizer:If the top touch panel or aka glass top is cracked or broken but the image under it is fine,then you only need the Touch Panel.
- Complete Screen with Touch Panel and LCD:If the top touch panel is broken and the lcd image is either black liquid or cracked you need a complete screen.