Touch Screen Digitizer for Huawei Ascend Y530 -Black

(1 review) Write a Review

SKU:: MBRPHW139
UPC:
MPN:
Condition:: New
Availability:: Usually ships in 24 hours

руб 551.66

Current Stock:

Quantity:

Description
Warranty Information

Description

Touch Screen Digitizer for Huawei Ascend Y530 -Black

Cracked,Shattered or Borken Huawei Ascend Y530 Glass,Unresponsive to touch?

This is the replacement front glass panel and Digitizer for the Huawei Ascend Y530 (LCD NOT Includede).This part is responsible for all touch functionality of the Huawei Ascend Y530.If you recently dropped your Huawei Ascend Y530,this is the glass/digitizer combo you need to replace it with.Beware of glass without the digitizer attached as the two must be replaced simultaneously.

Often Corrects the Following Problems:

Cracked,Scratched,Broken or shattered Glass
Unresponsive to touch

Compatible with:

Huawei Ascend Y530

How to tell which Screen part you need for the Huawei Ascend Y530:

LCD Only:If the image under the glass is broken and the touch pancel is NOT then you only need an LCD
Touch Panel aka Digitizer:If the top touch panel or aka glass top is cracked or broken but the image under it is fine,then you only need the Touch Panel
Complete Screen with Touch Panel and LCD:If the top touch panel is broken and the lcd image is either black liquid or cracked you need a complete screen

View AllClose

Warranty Information

Parts offer a 90-Day warranty. The warranty period covers any defects in the material or the workmanship of the product. Warranty does not cover any damage done while using the product. Any product returned within warranty period will be eligible for a refund or a replacement.

View AllClose

1 Review

1 Review

4
The pruduct itself work fine but...

Posted by Unknown on Dec 26, 2014

Th digitizer arrived thoroughly wrapped per post. I noticed only some weeks later when I had time to repair that it is full with fine, one-direction scratches on the inner side. The outer side is protected by a removable foil (so it does not matter on that side) but the inner side is unprotected. On the inner side, there is also a kind of thick (plexi?) foil that must be kept and that had many lengthwise parallel scratches. I've tested: they are roughly visible while in operation, in front of a white/bright screen content. My theory is - if the digitizer was posted in a scratchless state - that the wrapping caused them. The plastic sachet was longer than the digitizer, so it could slide inside back and forth, this may have caused the scratches. It was also disappointing that the product doesn't contain any support to fasten/glue. To solve this issue, needed much more time than the whole disassembling/assembling of the phone.